Regina's Vape Shop Since 2014!
Cart 0

Aspire

Aspire Feedlink Revvo BF Starter Kit

$59.99 $74.99

Aspire Feedlink Revvo BF Starter Kit

Aspire brings the Feedlink Revvo BF Starter kit to the table. This kit pairs the Revvo Boost tank and a squonk bottle, creating a total juice capacity of 9mL. The Feedlink box mod has a power output of 3.0 to 4.2V, and is powered by a single flat-top 18650 battery (sold separately) and is stored independent from the squonk bottle. The squonk bottle can be accessed through the bottom of the device by removal of a quarter-turn cap.

The Feedlink mod features several safety features such as 10 second cutoff, short circuit protection, overheating protection, and over-discharge protection. The device can be locked by clicking the Feedlink's oversized fire button five times. A combination of orange and blue LED lights behind the firing button indicate battery levels, with blue indicating power levels above 3.8V, blue/orange indicates 3.8 to 3.5V, and orange 3.5V or below.

The redesigned Revvo Boost tank still uses the Aspire Radial Coil (ARC), which have a resistance of 0.1 to 0.4 Ohms and a wattage range of 70 to 80W. The Revvo Boost tank has had it's capacity reduced to 2mL due to the addition of the 7mL squonk bottle. Airflow is controlled by turning a knurled ring under the delrin mouthpiece.

Quick Links:

Premium E-Liquid
Aspire Revvo Boost Replacement Coils

Product Features:

  • Regulated Device
    • 3.0 to 4.2V Output
  • Bottom Feed Bottle
    • 7ml Maximum Capacity
    • Screw-In Cylinder Casing
  • Single 18650 Battery Powered
    • Screw-In Cap Door
    • Battery Sold Separately
  • Single Button Control Face
    • Oversized Firing Button
    • Press Five Times to Lock/Unlock
      • LED Will Flash Orange and Blue Three Times
  • LED Light Indicator
    • Under the Fire Button
    • LED Will Glow to Indicate Battery Life When Pressed
      • Blue
        • Above 3.8V
      • Blue and Orange
        • Between 3.8V to 3.5V
      • Orange
        • Below 3.5V
  • Safety Features
    • Automatic Firing Cutoff
      • 10 Second Maximum Fire Time
    • Short Circuit Protection
    • Over Discharge Protection
    • Over Heat Protection
  • Ergonomic Device Body Design

      Aspire Revvo Boost Sub-Ohm Tank Specs:

      • 24mm Diameter
      • Stainless Steel Protective Glass Sleeve
      • Bottom Fill Squonk Pin
        • 2ml Tank Capacity
      • Triple Top Adjustable Airflow
        • 10.5mm by 2.5mm Each Airslot
        • Fully Closeable
      • ARC (Aspire Radial Coil) Coil Family
        • Horizontal Orientation
        • 0.10 to 0.14 ohm
          • 70 to 80W Wattage Range
        • Kanthal AF Wire
        • Organic Cotton
      • Wide Bore Delrin Drip Cap
        • Drip Tip Acts as Drip Cap
        • 12mm Wide Bore
      • Stainless Steel, Plastic, and Glass Construction

      Product Dimensions:

      • Feedlink Squonk Mod
        • 87mm by 48mm by 30mm
      • Revvo Boost BF Tank
        • 24mm by 41mm

      Product Includes:

      • One Feedlink Squonk Mod
      • One Revvo Boost Tank
      • Two Arc Coils Replacement Coils
        • 0.10 to 0.14 ohm
      • One Spare Glass Tube
      • Eleven O-rings
      • User Manual, Warning Card, and Warranty Card

      This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

      Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

      We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.


      This product will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

      DO NOT use the MicroUSB port for anything more than firmware updates. Use of the MicroUSB port for charging batteries will void warranty. Please charge your batteries using an external charger.

      Queen City Vapes will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.


      Share this Product


      More from this collection