Voted Regina's Best Vape Shop for 2017 & 2018!
Cart 0


Aspire Feedlink Revvo BF Starter Kit


Aspire Feedlink Revvo BF Starter Kit

Aspire presents the Feedlink Revvo BF Starter Kit, a single 18650 battery powered squonk mod paired with the Revvo Boost BF Tank with a total capacity of 9ml of E-Liquid. The Feedlink Mod has a power output range of 3.0 to 4.2V and is dependent on battery life. The single 18650 battery (sold separately) is held independently from the silicone juice bottle within the device with a silver screw-in cap door. The squonk bottle is kept in the device with a black plastic screw-in casing. The Feedlink has one oversized firing button with an LED indicator light located on the top of the device. The device can be locked and unlocked with five button presses, which is then indicated by 5 blinks of orange and blue LED lights. The light will glow when the firing button is pressed to indicate battery output. Blue indicates power levels above 3.8V, blue and orange will indicate 3.8 to 3.5V, and Orange will indicate 3.5V or below. The Feedlink mod also has several safety features such as 10 second automatic firing cutoff, short circuit protection, over discharge protection, and overheating protection. The Feedlink is paired with the redesigned Revvo Boost, which still features the Aspire Radial Coil (ARC), with a horizontal, "stove-top" design. The ARC coils have resistance of 0.1 - 0.4 ohm and has a wattage range of 70 to 80W. The Revvo Boost's tank capacity has been reduced to 2ml because of the addition of the 7ml squonk bottle. The triple 10.5mm by 2mm air port can be controlled with a knurled ring right under the wide bore Delrin Drip Cap. The Aspire Feedlink Revvo BF Starter Kit is an excellent squonk kit with juice capacity and design that makes it competitive in today's market.

Quick Links:

Premium E-Liquid
Aspire Revvo Boost Replacement Coils

Product Features:

  • Regulated Device
    • 3.0 to 4.2V Output
  • Bottom Feed Bottle
    • 7ml Maximum Capacity
    • Screw-In Cylinder Casing
  • Single 18650 Battery Powered
    • Screw-In Cap Door
    • Battery Sold Separately
  • Single Button Control Face
    • Oversized Firing Button
    • Press Five Times to Lock/Unlock
      • LED Will Flash Orange and Blue Three Times
  • LED Light Indicator
    • Under the Fire Button
    • LED Will Glow to Indicate Battery Life When Pressed
      • Blue
        • Above 3.8V
      • Blue and Orange
        • Between 3.8V to 3.5V
      • Orange
        • Below 3.5V
  • Safety Features
    • Automatic Firing Cutoff
      • 10 Second Maximum Fire Time
    • Short Circuit Protection
    • Over Discharge Protection
    • Over Heat Protection
  • Ergonomic Device Body Design

      Aspire Revvo Boost Sub-Ohm Tank Specs:

      • 24mm Diameter
      • Stainless Steel Protective Glass Sleeve
      • Bottom Fill Squonk Pin
        • 2ml Tank Capacity
      • Triple Top Adjustable Airflow
        • 10.5mm by 2.5mm Each Airslot
        • Fully Closeable
      • ARC (Aspire Radial Coil) Coil Family
        • Horizontal Orientation
        • 0.10 to 0.14 ohm
          • 70 to 80W Wattage Range
        • Kanthal AF Wire
        • Organic Cotton
      • Wide Bore Delrin Drip Cap
        • Drip Tip Acts as Drip Cap
        • 12mm Wide Bore
      • Stainless Steel, Plastic, and Glass Construction

      Product Dimensions:

      • Feedlink Squonk Mod
        • 87mm by 48mm by 30mm
      • Revvo Boost BF Tank
        • 24mm by 41mm

      Product Includes:

      • One Feedlink Squonk Mod
      • One Revvo Boost Tank
      • Two Arc Coils Replacement Coils
        • 0.10 to 0.14 ohm
      • One Spare Glass Tube
      • Eleven O-rings
      • User Manual, Warning Card, and Warranty Card

      This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

      Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

      We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

      This product will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

      DO NOT use the MicroUSB port for anything more than firmware updates. Use of the MicroUSB port for charging batteries will void warranty. Please charge your batteries using an external charger.

      Queen City Vapes will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

      Share this Product

      More from this collection