OFRF nexMesh Sub Ohm Tank
OFRF nexMesh Sub Ohm Tank
Designed in California
Presenting the nexMESH Sub Ohm tank from OFRF, a 25mm Sub-Ohm Tank with the industry's first conical designed mesh coil This revolutionary sub-ohm tank is designed for maximum flavour and vapour production with the use of the OFRF's patented nexMESH Coil technology in a conical design. The superior coil technology, paired with the stunning design of the tank itself, make the nexMESH Sub-Ohm Tank the only sub-ohm tank to own this year.
The science behind the nexMESH replacement coil is what allows this sub-ohm tank to be superior to other mesh sub-ohm tanks on the market. OFRF pairs their nexMESH coil technology with a conical shape and two separate layers of organic cotton. The design allows the coil to ramp up from bottom to top with lightning fast speed, with a larger surface area than all other mesh sub-ohm tank coils. As the coil is fired and air is drawn through the coil, the wider bottom point of the coil allows maximum airflow to enter the heating chamber, which is condensed as it makes its way to the top. The vapour is then drawn into a second condensing chamber located at the base of the vape tank's chimney, housing the coil structure inside. This double vapour condenser rapidly produces a super dense cloud of vapour full of flavour. OFRF includes two types of conical mesh coils; a nexMESH A1 coil and a nexMESH 316L coil. The standard nexMESH A1 coil can be ran at 75W to 80W and is made from Kanthal A1. The nexMESH 316L coil is the first temperature control capable conical mesh coil in the industry. This coil can be used with TC mode at 350°F to 540°F for those that prefer temp control, but can also be ran in wattage mode at 55W to 75W.
The nexMESH Sub-Ohm Tank is constructed from stainless steel and glass with a standard capacity of 4ml. An additional bubble glass expansion tank section is included and yields a total eLiquid capacity of 6ml, that can be filled with your favourite eLiquid. Filling is made easy with the large fill port, which is accessible via the child resistant sliding top cap. OFRF has also built in a fill port flap as part of the fill port seal to prevent any accidental spilling when filling.
The OFRF nexMESH Sub-Ohm Tank is feature packed and offers practical innovations sure to please all vapers. This is sure to be the hottest tank of the year, following the success of the nexMESH replacement coil itself.
Check out Matt from SMM's OFRF nexMESH Sub-Ohm Tank Video Review HERE!
25mm Base Diameter
- 40.5mm Tall
- Locking Slide-To-Fill Top Cap
- Child Resistant
- Large Fill Port
- Leak Resistant Silicone Gasket
- 4ml Capacity
- 6ml Bubble Glass Included
- Adjustable Triple Airflow System
- Bottom Mounted Airflow Control Ring
- 10mm by 3mm Each Air Hole
- Fully Close-able
- nexMESH Conical Mesh Coil
- nexMESH A1
- 0.2 ohms
- 75W to 85W
- Kanthal A1
- Organic Cotton
- nexMESH SS316L
- 0.15 ohms
- 350°F to 540°F
- 180°C to 280°C
- Can Be Used Without Temp Control
- 55W to 75W
- Organic Cotton
- Stainless Steel and Glass Construction
- 810 Acrylic Resin or Delrin Drip Tip
- 12mm Bore
- One nexMESH 25mm Sub-Ohm Tank
- One 6ml Bubble Glass Tank Section
- One nexMESH A1 Conical Mesh Coil (Pre-Installed)
- One nexMESH SS316L Conical Mesh Coil
- Spare Parts Bag
- User Manual
- OFRF Sticker Set
Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
This product will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discolouration from regular use is considered normal wear and tear and is not covered by warranty.
Queen City Vapes will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.