OFRF nexMesh Sub Ohm Tank Replacement Coils
WARNING: Vaping products release chemicals that may harm your health.
- Health Canada
AVERTISSEMENT: Les produits de vapotage libèrent des substances qui peuvent être nocives pour la santé. - Santé Canada
OFRF offer two types of Conical Mesh Replacement Coils for the OFRF nexMESH Conical Mesh Sub-Ohm Tank; a nexMESH A1 coil and a nexMESH 316L coil. The standard nexMESH A1 coil can be ran at 75W to 80W and is made from Kanthal A1. The nexMESH 316L coil is the first temperature control capable conical mesh coil in the industry. This coil can be used with TC mode at 350°F to 540°F for those that prefer temp control, but can also be ran in wattage mode at 55W to 75W. Each replacement coil pack is sold as a pack of two (2) coils.
- nexMESH Conical Mesh Coil
- nexMESH A1
- 0.2 ohms
- 75W to 85W
- Kanthal A1
- Organic Cotton
- nexMESH SS316L
- 0.15 ohms
- 350°F to 540°F
- 180°C to 280°C
- Can Be Used Without Temp Control
- 55W to 75W
- Organic Cotton
- Two Mesh Replacement Coils
Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practised when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Please Note: This product is not covered by warranty and cannot be exchanged.